If you’ve ever encountered the 0x0000007B BSOD (Blue Screen of Death), you know how frustrating it can be. This error can be caused by a variety of things, but luckily there are a few ways to fix it. In this blog post, we’ll go over some of the most common causes of the 0x0000007B error and how to fix them.
Table of Contents
How to Fix 0x0000007B BSOD
What is 0x0000007B BSOD?
0x0000007B is a blue screen error that indicates that Windows has failed to access a critical file or driver needed to boot the operating system. This error can be caused by a variety of issues, including a corrupt or missing critical file or driver, a faulty hardware component, or a misconfigured BIOS.
If you encounter this error, it is important to troubleshoot the issue immediately to prevent your system from becoming unbootable. There are a few different ways to go about fixing this error, which we will outline below.
1. Check for corrupt or missing files
One of the most common causes of 0x0000007B errors is a corrupt or missing critical file or driver. You can check for these files by booting into Safe Mode and running a file checker tool like Windows File Checker.
If any corrupt or missing files are found, you will need to restore them from a backup or reinstall them from their original source.
2. Check for faulty hardware
Another common cause of 0x0000007B errors is faulty hardware. This can include issues with your computer’s hard drive, RAM, or other components.
If you suspect that hardware is the cause of your 0x0000007B error, you can try running a hardware diagnostic tool like Windows Memory Diagnostics.
3. Check your BIOS settings
If your BIOS is configured incorrectly, it can cause 0x0000007B errors. To check your BIOS settings, you will need to enter the BIOS setup utility.
Once in the BIOS setup utility, look for any options that might be misconfigured or disabled. If you find any, make sure to enable or correct them and then save and exit the BIOS.
4. Perform a clean boot
A clean boot is a process of starting Windows with a minimal set of drivers and startup programs. This can help to rule out software-related causes of 0x0000007B errors.
To perform a clean boot, you will need to enter the Windows Recovery Environment and then select the “Troubleshoot” option. From here, you will need to select the “Startup Settings” option and then choose to “Disable all startup programs”.
After completing a clean boot, you can then try to boot Windows normally to see if the 0x0000007B error has been fixed.
5. Perform a clean install of Windows
If you are still seeing 0x0000007B errors after trying all of the above steps, your last resort will be to perform a clean install of Windows. This will erase all of the data on your hard drive, so be sure to back up your important files before proceeding.
To perform a clean install of Windows, you will need to boot from your installation media and then select the “Custom” installation option. From here, follow the prompts to erase your hard drive and then install Windows.
How to Fix 0x0000007B BSOD
The 0x0000007B BSOD is a very common error that can occur on a Windows computer. There are a few different ways to fix this error, but the most effective way is to use a professional 0x0000007B BSOD fixer tool.
The 0x0000007B BSOD fixer tool will scan your computer for any corrupt or missing files and then replace them with working copies. This will fix the 0x0000007B BSOD error and allow your computer to boot normally again.
Conclusion
The 0x0000007B BSOD is a very serious error that can cause your computer to crash. If you see this error, it is important to fix it as soon as possible. There are a few different ways to fix the 0x0000007B BSOD, but the most effective way is to use a Windows repair tool. These tools are designed to fix a wide variety of Windows problems, including the 0x0000007B BSOD.
References
If you’re seeing the 0x0000007B BSOD error, it’s likely that your computer’s hardware is causing the issue. Here are some troubleshooting steps you can try to fix the problem:
1. Check your computer’s hardware. Make sure all of the cables are securely connected, and that there are no loose components.
2. If you’re using a SATA hard drive, make sure the SATA controller is properly configured in your BIOS.
3. If you’re using an IDE hard drive, make sure the IDE controller is properly configured in your BIOS.
4. Try booting from a different hard drive. If the problem persists, it’s likely that there’s something wrong with your computer’s hard drive.
5. If you’re using a SCSI hard drive, make sure the SCSI controller is properly configured in your BIOS.
6. Try booting from a different medium. If the problem persists, it’s likely that there’s something wrong with your computer’s hard drive.
7. If you’re using a RAID array, make sure the RAID controller is properly configured in your BIOS.
8. Try using a different video card. If the problem persists, it’s likely that there’s something wrong with your computer’s video card.
9. If you’re using a sound card, make sure the sound card is properly configured in your BIOS.
10. Try resetting your BIOS to its default settings. If the problem persists, it’s likely that there’s something wrong with your computer’s BIOS.
