How to Fix the ‘Default Radeon WattMan Settings Have been Restored due to Unexpected System Failure’ Error on Windows?

If you’ve been getting the ‘Default Radeon WattMan Settings Have been Restored due to Unexpected System Failure’ error on your Windows PC, don’t worry, there is a fix. This error is caused by your graphics card’s drivers becoming corrupted. The good news is that you can fix this problem by simply updating your drivers. Here’s a step-by-step guide on how to do it.

How to Fix the ‘Default Radeon WattMan Settings Have been Restored due to Unexpected System Failure’ Error on Windows?

What is the ‘Default Radeon WattMan Settings Have been Restored due to Unexpected System Failure’ Error?

The ‘Default Radeon WattMan Settings Have been Restored due to Unexpected System Failure’ error is an error that is displayed when the Radeon WattMan settings have been reset due to an unexpected system failure. This error can be caused by a variety of factors, including a corrupt or outdated graphics driver, a power outage, or a problem with the graphics card itself. In most cases, the error can be fixed by updating the graphics driver or resetting the Radeon WattMan settings.

How to Fix the ‘Default Radeon WattMan Settings Have been Restored due to Unexpected System Failure’ Error?

The ‘Default Radeon WattMan Settings Have been Restored due to Unexpected System Failure’ is an error message that may appear on your Windows 10 computer. This error can be caused by a variety of things, but is typically caused by a problem with your graphics card or driver.

See also  How to Fix An Error Occurred While Preparing the Installation on Mac

If you see this error message, there are a few things you can do to try and fix it. First, try updating your graphics card driver. If that doesn’t work, try resetting your graphics card settings to the default. Finally, if all else fails, you can try a clean install of your graphics card driver.

If you’re not sure how to update your graphics card driver, you can follow the instructions below.

First, open Device Manager. You can do this by right-clicking the Start button and selecting “Device Manager” from the pop-up menu.

Next, find your graphics card under the “Display adapters” section and double-click it to open its properties.

From here, click the “Update driver” button and follow the instructions to install the latest driver for your graphics card.

If updating your graphics card driver doesn’t fix the problem, you can try resetting your graphics card settings to the default. To do this, open the Radeon Settings application.

Next, click on the “Global Settings” tab and then click the “Restore” button.

Finally, click “OK” to save the changes and restart your computer.

If you’re still seeing the ‘Default Radeon WattMan Settings Have been Restored due to Unexpected System Failure’ error, you can try a clean install of your graphics card driver. To do this, you’ll need to download the latest driver for your graphics card from the manufacturer’s website.

Once you’ve downloaded the driver, open the “Device Manager” again and find your graphics card under the “Display adapters” section.

Double-click your graphics card to open its properties and then click the “Uninstall” button.

See also  Adventure Capitalist Guide 2017

Check the “Delete the driver software for this device” box and then click “OK”.

Restart your computer and then install the driver you downloaded from the manufacturer’s website.

Hopefully, one of the above methods will fix the ‘Default Radeon WattMan Settings Have been Restored due to Unexpected System Failure’ error for you.

Conclusion

The ‘Default Radeon WattMan Settings Have been Restored due to Unexpected System Failure’ error is a relatively common issue that can occur on Windows 10. Thankfully, it’s usually easy to fix and shouldn’t cause any permanent damage to your system.

If you’re seeing this error, it’s likely because your graphics card is overheating. Make sure you have good airflow in your case and that your graphics card is properly seated in its slot. You may also need to update your graphics card drivers.

If you’ve tried all of those things and you’re still seeing the error, you may need to factory reset your graphics card. This will restore its settings to the defaults, which may fix the issue. Be sure to back up your data before you do this, as it will wipe all of your custom settings.

Hopefully, this article has helped you fix the ‘Default Radeon WattMan Settings Have been Restored due to Unexpected System Failure’ error. If you have any further questions or issues, feel free to reach out to us in the comments section below.

Additional Resources

If you are still having trouble after following the steps above, you may want to check out some additional resources. Here are a few that may be helpful:

See also  How to Remove Defaultuser0 Password on Windows?

• How to Fix the ‘Default Radeon WattMan Settings Have been Restored due to Unexpected System Failure’ Error on Windows?

• How to Fix the ‘Radeon Settings: Host Application Has Stopped Working’ Error on Windows?

• How to Fix the ‘AMD Display Driver Has Stopped Responding and Has Recovered’ Error on Windows?

How to Fix the ‘Default Radeon WattMan Settings Have been Restored due to Unexpected System Failure’ Error on Windows?

Share: Facebook, Twitter, Google Plus

Leave a Comment: